Introduction; Features; Description; Applications - Beta Three TW Pro Series User Manual

INTRODUCTION

TW12
Two Way12" Full Range Passive Speaker

Features

One 12 High Power LF T "
One 44mm HF Driver.
Computer aided design to optimize frequency and
phase response.
Frequency Response 50Hz - 20kHz (-3dB).
Sensitivity 95dB, MAX. SPL 115dB/121dB(PEAK).
Rated Power 250W(RMS), 1000W(PEAK).
Durable Polyurethane textured base paint.

Description

Beta Three TW12 is two way wide-dispersion full range speaker
which adopts the new structure and patented horn design.
It integrates one 12" woofer and one 44mm compression
driver. The voice coil in the woofer uses the round copper-
clad aluminium wire of inside and outside wrap technology,
the TIL backbone enhances the heat dissipation of the
voice coil and improves the power handling of the woofer
too. Symmetrical magnet circuit design reduces the odd-
order harmonic distortion to lower level. The 44mm flat
voice coil in the compression driver develops the magnetic
energy efficiently to both enhance the intensity
the voice coil and increase the power handling. The rated
power reaches to 250W, Max. power reaches to 1000W.
Cabinet is made of birch plywood
environmental protection Polyurethane-based
which is very rigid. The strength of cabinet itself reaches
to 4500N. Each suspension point can bare 3000N. Q235
grille with powder coating provides strong ultra weather
resistance, which can be used outdoors for 5 years.
ransducer .
with advanced
painting

Applications

Church
Auditorium
Conference room
Small performance
Multifunctional hall
of
TW12
TW Series Pro Loudspeaker System
3