Danfoss EV210B How To Use Manual page 13

Cable
Coil replacement
© Danfoss A/S (IA-MC/mhe) 05-2007 / 520B2809
To avoid moisture penetrating in the terminal box,
the whole cable diameter must be secured in the
entry. For this reason, always use round cables
as they are the only type that can be effectively
sealed.
Note the colours on the cable leads. Yellow/green
is always earth. The other leads should be for the
phase and neutral supply.
Please note for clip-on coils.
When replacing a coil, use a screwdriver to lever it
from the armature.
Caution: Before removing a coil, voltage must be
disconnected, otherwise the coil will burn out.
Installation