Klarstein 10033285 Manual page 23

4 Fix the angle bars with 8 M5 screws to the hanging plate. Extend the angle bars to
the required height and then fix them with 16 M5 screws.
Note: The angle bars must have an overlap of AT LEAST 100 mm.
5 If your cooker hood is going to be used in extraction mode, the ducting hose must
be connected to the ceiling adaptor at this point. Fix the upper chimney section to
the hanging plate with 4 self tapping screws.
M5 + nuts
M5
M5 + screws + nuts
EN
23