Table of Contents
Advertisement
Quick Links
Introduction
The Cyber 1S1P PCIe high-speed serial I/O card provides
one 9-pin RS-232 serial port and one parallel port.
Features and Benefits
•
PCI Express 1-lane (x1) adapter that works in any
PCI Express slot
•
Compliant with PCI Express Base Specification
Revision 1.0a
•
Provides an RS-232 serial & parallel port (DB-25)
•
Parallel port supports ECP, EPP, SPP (standard)
parallel port modes
System Requirements
•
PCI Express-enabled system with an available PCI
Express slot
•
Windows
(32-/64-bit) / XP (32-/64-bit) / Server 2003 & 2008
(32-/64-bit) / Server 2008 R2 / 2000
Package Contents
•
Cyber 1S1P PCIe adapter
•
Driver CD
•
Quick installation guide
04-0615B
Cyber
Quick Installation Guide
8 (32-/64-bit) / 7 (32-/64-bit) / Vista
®
1S1P
PCIe
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SIIG Cyber 1S1P PCIe
Summary of Contents for SIIG Cyber 1S1P PCIe
- Page 1 Cyber 1S1P PCIe Quick Installation Guide Introduction The Cyber 1S1P PCIe high-speed serial I/O card provides one 9-pin RS-232 serial port and one parallel port. Features and Benefits • PCI Express 1-lane (x1) adapter that works in any PCI Express slot •...
- Page 2 Layout Serial Port Parallel Port Figure 1: Layout Hardware Installation General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer’s reference manual for further information, if needed. Static Electricity Discharge may permanently damage your system.
- Page 3 Replace the computer cover and reconnect the power cord. Driver Installation Install the board and boot up Windows, then follow the instructions below to install the Cyber 1S1P PCIe drivers. Windows 8 (32-/64-bit) / 7 (32-/64-bit) / Server 2008 R2 Note: Windows 7 may automatically search preconfigured driver folders for the proper driver.
- Page 4 Repeat steps 4-6, then restart the computer to complete the installation. Windows Vista (32-/64-bit) / Server 2008 (32-/64- bit) At the Found New Hardware, click Cancel. Insert the driver CD. Close the CD AutoPlay window if prompted. For Windows Vista: Right click Computer, click Manage, click Continue, then click Device Manager.
- Page 5 Windows XP / Server 2003 (32-/64-bit) Insert the driver CD. Close the CD AutoPlay window if prompted. At the Found New Hardware Wizard, select Install from a list or specific location (Advanced), then click Next. Check Include this location in the search, uncheck the other boxes.
- Page 6 Click OK, then close Device Manager to save the change. To change LPT port: From the Device Manager, double click Ports (COM & LPT), then double click the SIIG CyberPro Parallel Port. Click Settings tab. Click the down arrow next to the LPT Port number, select a LTP port that is not in use, then click OK.
- Page 7 SIIG will, at our discretion, repair or replace (with an identical product or product having similar features and functionality) the product if defective in materials or workmanship.
- Page 8 Fremont, CA 94538-3152, USA Phone: 510-657-8688 Cyber 1S1P PCIe is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other names used in this publication are for identification only and may be trademarks of their respective owners.
Need help?
Do you have a question about the Cyber 1S1P PCIe and is the answer not in the manual?
Questions and answers