Download  Print this page

Sony KV-HA14 Operating Instructions Manual

Fd trinitron wega color tv
Hide thumbs


Trinitron Color TV
Operating Instructions
• Before operating the unit, please read this manual thoroughly and
retain it for future reference.
© 2001 Sony Corporation
4-085-449-12 (1)



  Also See for Sony KV-HA14

  Related Manuals for Sony KV-HA14

  Summary of Contents for Sony KV-HA14

  • Page 1 Trinitron Color TV Operating Instructions • Before operating the unit, please read this manual thoroughly and retain it for future reference. KV-HA21 KV-HA14 © 2001 Sony Corporation 4-085-449-12 (1)
  • Page 2: Getting Started

    Getting Started SELECT PROGR SELECT Step 1 Insert the batteries (supplied) into the remote. Note • Do not use old batteries nor use different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. •...
  • Page 3 WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 110 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.
  • Page 4: Securing The Tv

    WARNING (continued) Do not place any objects on the TV. Install the TV on a stable TV stand and floor which can support the TV set weight. Ensure that the TV stand surface is flat and its area is larger than the bottom area of the TV.
  • Page 5: Tv Front And Rear Panels

    TV front and rear panels TV front panel (MONO) Button PROGR +/– 2 +/– * SELECT * You can also use the 2 +/– buttons on the TV to work as the +/– buttons on the remote. TV rear panel SELECT PROGR Function...
  • Page 6: Connecting Optional Components

    Connecting optional components Connecting to the video input terminal ( t ) TV front panel (MONO) TV rear panel L(MONO) Note • Do not connect video equipment to the same time; otherwise the picture will not be displayed properly on the screen. Connecting to the monitor output terminal (T) TV rear panel L(MONO)
  • Page 7: Troubleshooting

    (KV-HA21M81 only) • Count the number of times the 1 (standby) indicator flashes. Press ! The 1 (standby) (main power) to turn off your TV. Contact your nearest Sony service indicator on your TV center. flashes red several times after every three seconds.
  • Page 8: Specifications

    Specifications Power requirements 110-240 V AC, 50/60 Hz Power consumption (W) Indicated on the rear of the TV Television system Color system PAL, PAL 60, SECAM, NTSC4.43, NTSC3.58 Teletext language English, Farsi (Persian), French Channel coverage VHF : E2 to E12 UHF : E21 to E69 CATV : S01 to S03, S1 to S41 UHF : B21 to B68...
  • Page 9: Remote Control

    Remote control JUMP SOUND PROGR MODE SPACE SOUND Button JUMP PROGR +/– 2 +/– SELECT PIC MODE +/– 0 – 9, ÷ Timer operations SOUND MODE SPACE SOUND Teletext operations (green label) (KV-HA21M81 only) (red, green, yellow, blue) Function Turn off temporarily or turn on the TV.
  • Page 10: Setting The Timers

    Setting the timers You can turn on and off your TV by using the JUMP SOUND PROGR MODE SPACE SOUND Notes • You can also cancel the Wake Up and Sleep timers by turning off the TV’s main power. • If no buttons or controls are pressed for more than two hours after the TV is turned on using the Wake Up timer, the TV automatically goes into standby mode.
  • Page 11: Presetting Channels

    Presetting channels You can automatically preset up to 100 TV channels in numerical sequence from program number 1, or manually preset desired channels and channels that cannot be preset automatically. Number buttons JUMP SOUND PROGR MODE + or – SPACE SOUND PIC MODE SELECT...
  • Page 12 Presetting channels (continued) To change the TV system setting (KV-HA21M81/HA21M80 only) If the picture or sound is abnormal when receiving programs through the 8 (antenna input) terminal (1) Press SELECT until “TV SYS” appears on the screen. (2) Press + or – to select the appropriate TV system until the picture or sound quality is optimal.
  • Page 13: Customizing The Picture And Sound

    Customizing the picture and sound You can customize the picture and sound by selecting the picture and sound modes or by adjusting its settings. You can change the sound effect by selecting the space sound mode. JUMP SOUND PROGR MODE SOUND MODE SELECT...
  • Page 14 Customizing the picture and sound (continued) Selecting the space sound mode Press SPACE SOUND. Select “ON” listen to monaural sound with a stereo-like effect. “OFF” turn off space sound mode. Note • You can also turn space sound on or off using the SELECT and + or – buttons. Adjusting the picture position KV-HA21M81 only If the picture is slanting, you can adjust the picture position using the...
  • Page 15: Viewing Teletext

    Viewing Teletext KV-HA21M81 only Some TV stations broadcast an information service called Teletext which allows you to receive various information, such as stock market reports and news. You can use the buttons on the remote to view Teletext. JUMP SOUND PROGR MODE SPACE...