First Time Operation; Switching On The Tv And Automatically Tuning - Sony KV-32LS65AUS Instruction Manual

Switching On the TV and Automatically Tuning

The first time you switch on your TV, a sequence of menu screens appear on the TV
enabling you to: 1) adjust the picture slant, 2) search and store all available channels
(TV Broadcast) and 3) change the order in which the channels (TV Broadcast) appear on
the screen.
However, if you need to change any of these settings at a later date, you can do that by
selecting the appropriate option in the
Button on the TV set.
1
Connect the TV plug to the mains socket (220-240V AC,
50Hz)
Do not connect the power cord until you have
completed making all other connections; otherwise a
minimum leakage current might flow through the
aerial and other terminals to ground.
The first time that the TV set is connected, it is usually
turned on. If the TV is off, press the
the TV set to turn on the TV.
The first time you switch on the TV, a menu screen
displays automatically on the TV.
2
Because of the earth's magnetism, the picture might slant.
The Picture Rotation menu allows you to correct the
picture slant if it is necessary.
a)
If it is not necessary, press
necessary and press OK.
b)
If it is necessary, press
then press OK and correct any slant of the picture
between –5 and +5 by pressing
OK to store.
3
The Auto Tuning menu appears on the screen. Press the
OK button to select Yes.
(Set Up menu) or by pressing the Auto Start Up
on/off button on
or to select Not
or to select Adjust now,
or . Finally press
If picture slants, please
adjust picture rotation
Not necessary
Adjust now
OK
Do you want to start
automatic tuning?
Yes
No
OK
continued...

First Time Operation

EN
OK
OK
7