Safetylnstructions - GLP JUNIOR SCAN 2 Lnstruction Manual

-eLp-
1.1
Safetylnstructions
The JUNIOR SCAN
2
is
a
High-Tech Product. To guarantee
a
smooth operation, it is necessary to keep following rules.
The
manufacturer
of this device will not take
responsibility of
damages through disregard
of the
information
in this
manual.
Warranty adjustments will be cancelled.
1.
Make sure that before putting into operation, the fan
and
the air
inlets
are
clean and not blocked by anything. JUNIOR SCAN
2
2.
Attention:
Don't touch the device during the operation. This can cause injuries
or damages.
3.
Unplug the JUNIOR SCAN
2lrom
the AC outlet before any service.
4.
lt is
necessary
to wait at least 30 minutes after disconnecting the AC before
you open the JUNIOR SCAN 2. Please do not touch the bulb of
the
lamp
if
you are not absolutely sure it
is
cold.
-Danqer
of
BURNING-
5.
Never look directly into the beam of the lamp. You risk injury of your retina and
blindness.
6.
Pay attention of
the
maximum lamp operation time. You have
to
change
it
if
the lamp shows any deformations
or
damages.
The same is with all
glass
components, color filters, lenses and mirrors.
7.
To
allow
a
secure operation, follow also
the lnstallation guide described
in
chapter
2.
Operating
the JUNIOR SCAN
2
without suited safety aids
like
Safety cables or clamps/hooks can increase the risk of an accident.
8.
The installation should be done by qualified staff only. Please pay attention
to
the common rules
of technology
that are not explicit mentioned
in
this manual.
9.
Use only original spare parts. Any structural
modification
will
cancel
all
warranty adjustments.
t*Esrmtutgr)r::.::.r...
.NlcHlNrDa{:mH*lcKeN
rrrl
..
.
usm.rus$iR:r:::::::
r:
NACH
DtN!til.&525Ttllli2001:r..
c,so$
lr.=,fllflllr,,r,
Attention:
Laser
of
class
3R
may
injure your retina after
a
short
resi-
dence time even without any
optical
instrument.
Avoid any direct
ex-
posure of your eyes!
GLP o German Light Production
4