Table of Contents
Advertisement
JUNIIF
-eLp-
7
Maintenance and Cleaning the JUNIOR SCAN
2
It is absolutely essential that the fixture is kept clean and that dust, dirt and smoke-fluid
residues must not built up on or within the fixture. Otherwise the fixture's light-output will
be
significantly reduced. Regular cleaning
will not only
ensure
the
maximum
light-
output, but will also allow the fixture to function reliably throughout its
life.
A soft
lint-free
cloth
moistened
with any good
glass cleaning
fluid is
recom-
mended, under no circumstances should alcohol or solvents be used!
The inside optical system should be
maintained
only by authorized persons.
Please
contact your local dealer.
7.1
Safety Regulations
o
Pull out the main plug!
o
Wait at least 20 minutes after the last operation to cool down the fixture.
.
Before you put the JUNIOR SCAN 2 into operation close the casing, otherwise
your retina can be
hurt!
7.2
Mirror and Optical System
Clean
the
mirror and the optical system of the JUNIOR SCAN
2 with water
and
some glass detergent.
To clean the inner side of the lens, it can be screwed out completely.
7.3
Air Cooling
System
Clean the fans, air channels and grills regularly.
Attention:
Do not cover the
air inlets
!!!
13
GLP
r
German Light Production
Hide quick links:
Advertisement
Table of Contents
