60 gallon trailer sprayer, with gas engine and diaphragm pump (20 pages)
Summary of Contents for PBZ CropCare F2500
Page 1
PBZ Owner's Manual 2.5 Gallon Turf Foam Marker Model F2500 PBZ LLC | 295 Wood Corner Rd | Lititz PA 17543 www.CropCareEquipment.com | (717) 738-7365 A Paul B Zimmerman Inc. Company Form: F2500OM Rev. Date 08/16...
® CropCare would like to thank you for choosing to purchase our model F2500 turf foam marker system. We appreciate your business and want to personally fill all of your equipment and sprayer needs. We also desire to provide you with the technical support and needed parts that will allow you to continue using your turf foam marker without disruption.
Safety Precautions General Guidelines Every year many unnecessary accidents occur due to improper equipment handling and a disregard for safety precautions. You, the operator, can avoid accidents by observing the precautions listed in this section. • The operator should be a responsible adult. Do not allow persons to operate the turf foam marker until they Warning have displayed a thorough understanding of turf foam...
Mounting the Turf Foam Marker Turf Foam Marker Unit ® If mounting the turf foam marker on a CropCare sprayer, place it on the center of the boom frame (Figure 2). Attach the turf foam marker by using the included 3/8”...
Mounting the Turf Foam Marker Discharge Tubes The discharge tubes (a) dispense the foam and should be mounted in the desired foaming position. Generally, they are mounted at the end of a sprayer boom (b) (Figure 4). If you are mounting the tubes on a sprayer, a nozzle body to compressor clamp (c) can be used.
Operating Instructions Flip the control switch to turn on the turf foam marker Please note: the 2.5 gallon capacity tank has an average unit. foaming time of 90 minutes. Allow approximately 30 seconds for the foam to reach To turn off the turf foam marker, simply flip the control the discharge tube.
Maintenance Instructions Winterizing your Turf Foam Marker It is essential that you winterize your turf foam marker to avoid damage and to allow for optimal performance. The winterization process should be undertaken before freezing conditions and/or after each season of use. Failure to winterize your turf foam marker will void the manufacturer's warranty.
Breakdowns & Parts Lists F2500 Parts List Ref # Qty. Part Number Description F2501 Turf foam marker frame, 2.5 gallon CM40 ** Air compressor, 12 volt BF1210 Boom mounting clip N232884 J-bolt, 1/4" x 2 5/16" F2503 2.5 gallon white foam marker tank (Includes item #17) FN14 Flange nut, 1/4"...
CropCare Limited Warranty ® Turf Foam Marker: Model F2500 Warranty Coverage ® ® CropCare hereby provides a Limited One (1) Year Warranty on Turf Foam Markers, manufactured by CropCare . Turf Foam Markers ® manufactured by CropCare are warranted against any manufacturer’s defects in any of the turf foam marker’s components in the 12 months following the original date of purchase.
Ordering Parts ® Please contact your authorized CropCare dealer to order replacement parts for your product. by PBZ Manufactured by PBZ LLC A Paul B Zimmerman Inc. Company 295 Woodcorner Road Lititz PA 17543 (717) 738-7365 Fax (717) 738-7375...