Table of Contents
Advertisement
piezobrush PZ2
Operating Instructions for Handheld Device
Preliminary data
2 Safety
This device is built according to corresponding international standards. Like with every
technical product incorrect or not intended use can however be dangerous.
Follow the instructions in this operating manual in addition to the general safety regulations.
Caution - Danger!
When working with the device, please note and observe the safety instructions and
requirements in these operating instructions because non-compliance may result in
serious or fatal injury.
2.1 Residual risks
This device has been manufactured in accordance with the current state of the art.
However, it is impossible to eliminate residual risks.
Always adhere to the following safety instructions:
Caution – Electrical voltage!
Only use the external power plug provided.
Danger from mains voltage. If the external power plug is visibly damaged:
-
Do not use the damaged part.
-
Have the damaged parts repaired by a qualified person or replace them.
Attention – Emissions!
Dangerous amounts of the reaction gas ozone (O
operation.
-
Volumes of ozone in excess of 0.2 mg/m³ may be produced.
-
Note that national health and safety measures must be observed when
operating the device.
-
Only use the device in well vented areas or in conjunction with a suitable
extraction device
Please read Cautions and warnings and
Important notes at the end of this document.
) may be produced during device
3
Page 3 of 17
Z63000Z2910Z1Z62
PZ2 - Prototypes
2019-06-12
Advertisement
Table of Contents
