Page 1
Series/Type: (bottom right header bar) PZ2 - Prototypes Preliminary data (optional): Preliminary data Department: Date: 2019-06-12 Version: TDK Electronics AG 2019. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without TDK Electronics' prior express consent is prohibited.
Product standards ..........................15 14 Spareparts and optional accessory....................... 15 Display of ordering codes for TDK Electronics products ..................15 2019-06-12 Please read Cautions and warnings and Page 2 of 17 Important notes at the end of this document.
PZ2 Z63000Z2910Z1Z62 Operating Instructions for Handheld Device PZ2 - Prototypes Preliminary data 2 Safety This device is built according to corresponding international standards. Like with every technical product incorrect or not intended use can however be dangerous. Follow the instructions in this operating manual in addition to the general safety regulations.
PZ2 Z63000Z2910Z1Z62 Operating Instructions for Handheld Device PZ2 - Prototypes Preliminary data Attention – Damage to device! Under no circumstances may the fan cover on the rear side of the device be closed. This would interrupt the supply of cooling medium required in operation.
3.2 Correct use The piezobrush PZ2 is a handheld device for generating technical plasma. It is used to pretreat a wide range of material surfaces before processes such as gluing or printing. It is also possible to use the cleaning effect of the plasma.
PZ2 Z63000Z2910Z1Z62 Operating Instructions for Handheld Device PZ2 - Prototypes Preliminary data 3.4 Description of device The individual parts of the generator are shown and named in the diagram below. These terms are used throughout the operating instructions. Component description...
Page 7
PZ2 Z63000Z2910Z1Z62 Operating Instructions for Handheld Device PZ2 - Prototypes Preliminary data Component description External power plug (with changeable plugs for EU, US and UK) Nearfield nozzle in socket for spare nozzle-inserts Foam inlay 2019-06-12 Please read Cautions and warnings and Page 7 of 17 Important notes at the end of this document.
PZ2 Z63000Z2910Z1Z62 Operating Instructions for Handheld Device PZ2 - Prototypes Preliminary data 4 Technical data Electrical data Supply voltage 15 V DC Power consumption max. 30 W Model Handheld device with external power plug Dimensions Weight 170 g (not including external power plug)
PZ2 Z63000Z2910Z1Z62 Operating Instructions for Handheld Device PZ2 - Prototypes Preliminary data 7 Special Note on the operation of the plasma process 7.1 General description Treating surfaces with atmospheric plasma has several advantages. Examples include the increase of surface energy resulting in improved surface wetting.
PZ2 Z63000Z2910Z1Z62 Operating Instructions for Handheld Device PZ2 - Prototypes Preliminary data 7.2 Notes on the correct handling of the substrates to be treated Caution – Electrical voltage! • Danger from electrical voltage Never direct the plasma beam at people or animals.
PZ2 Z63000Z2910Z1Z62 Operating Instructions for Handheld Device PZ2 - Prototypes Preliminary data 8 Operation 8.1 General operating instructions Ensure that the fan grille is not covered so that the device can draw in enough ambient air. Always hold the device in the middle area where the button and the logo plate are located and not in the area closer to the tip (see picture).
PZ2 Z63000Z2910Z1Z62 Operating Instructions for Handheld Device PZ2 - Prototypes Preliminary data Standard-Nozzle The standard-nozzle is inserted by default into the device. This nozzle is used for various applications for non-conductive substrates. Conductive Substrates such as metals or conductive polymers cannot be treated reliably with this nozzle.
PZ2 Z63000Z2910Z1Z62 Operating Instructions for Handheld Device PZ2 - Prototypes Preliminary data Note! The plasma generator with standard nozzle is not fit for the use on metal or electrically conductive substrate Such substrate may result in negative affect on the process and damage to the device.
PZ2 Z63000Z2910Z1Z62 Operating Instructions for Handheld Device PZ2 - Prototypes Preliminary data 11 Troubleshooting Fault / error Cause Rectification Device cannot be started or Mains failure. Check electrical power supply. plasma stops during operation Mains fuse triggered. Check mains fuse.
The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products. Detailed information can be found on the Internet under www.tdk-electronics.tdk.com/orderingcodes. 2019-06-12 Please read Cautions and warnings and Page 15 of 17 Important notes at the end of this document.
Page 16
Referring to customer requirements and customer specific requirements (“CSR”) TDK always has and will continue to have the policy of respecting individual agreements. Even if IATF 16949 may appear to support the acceptance of unilateral requirements, we hereby like to emphasize that only requirements mutually agreed upon can and will be implemented in our Quality Management System.
Page 17
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap, PQSine, PQvar, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.tdk-electronics.tdk.com/trademarks. Release 2018-10 Page 17 of 17...