Sprayer Use; Unloading The Sprayer From The Truck; Before Putting The Sprayer Into Operation - Hardi Commander Twin Force Plus Instruction Book

Spr Spra a a a a y y y y y er use Spr er use er use
Spr Spr er use er use
The HARDI COMMANDER sprayer is for the application
of crop protection chemicals and liquid fertilisers.
The equipment must only be used for this purpose. It is
not allowable to use the sprayer for other purposes.
If no local law demands that the operator must be
certified to use the spray equipment, it is strongly recom-
mended to be trained in correct plant protection and in
safe handling of plant protection chemicals to avoid
unnecessary risk for persons and the environment when
doing the spray job.
Unloading the spr Unloading the spra a a a a y y y y y er fr Unloading the spr
Unloading the spr Unloading the spr
For the unloading of the sprayer a crane or a fork lift is
needed. When loading with a crane please observe the
lifting points as shown on the illustration, and make sure
that the straps or belts used for lifting are strong enough.
Bef Befor Bef or or or ore putting the spr e putting the spra a a a a y y y y y er into e putting the spr e putting the spr
Bef Bef e putting the spr
oper oper opera a a a a tion oper oper tion tion tion tion
Although the sprayer has been applied with a strong and
protective surface treatment on steel parts, bolts etc. in
the factories, it is recommended to apply a film of
anticorrosion oil (e.g. CASTROL RUSTILLO or SHELL
ENSIS FLUID) on all metal parts in order to avoid
chemicals and fertilisers discolouring the enamel.
If this is done before the sprayer is put into operation for
the first time, it will always be easy to clean the sprayer
and keep the enamel shiny for many years.
This treatment should be carried out every time the
protection film is washed off.
8
Description
er fr er fr om the tr om the tr uc uc uck k k k k
er from the tr er fr om the tr om the truc uc
T021-0003
er into er into er into
er into
GB 04 06