Use Of Rinsing Tank And Rinsing Nozzles (If Fitted) - Hardi Commander Twin Force Plus Instruction Book

IMPORTANT! The hopper rinsing device is using spray
liquid to rinse the hopper for concentrated chemical. The
FILLER must always be cleaned together with the rest of
the sprayer when the spray job is done.
10.Close valve A and the FILLER lid again.
11.When the spray liquid is well mixed, turn handle on
the Pressure Manifold towards “Spraying” position.
Keep P.T.O. engaged so the spray liquid is continu-
ously agitated until it has been sprayed on the crop.
40
Operation
Use of rinsing tank and rinsing Use of rinsing tank and rinsing
Use of rinsing tank and rinsing Use of rinsing tank and rinsing Use of rinsing tank and rinsing
nozzles (if f f f f fitted) nozzles (if nozzles (if
nozzles (if nozzles (if
The incorporated rinsing tank can be used for two
different purposes.
A. In-field diluting of remaining spray liquid residue in the
spraying circuit for spraying the liquid in the field, before
cleaning the sprayer.
1. Empty the sprayer as much as possible.
Turn the green pressure valve towards “No
Agitation” and spray till air comes out of all
nozzles.
2. Remove the tank filter basket.
3. Turn black suction valve towards “Rinsing
tank”.
4. Turn green pressure valves towards “Rins-
ing nozzle” (if fitted).
5. Engage and set the pump at appro.. 300
r.p.m.
6. When rinsing water corresponding to appro.. 10
times the spray liquid residue (see paragraph
“Technical Residue”) is used, turn black
suction valve towards “Suction from main
tank” and operate all valves, so all hoses and
components are rinsed.
7. Turn green pressure valve back to “Operat-
ing unit” and spray liquid in the field you have
just sprayed.
8. Repeat point 3-7 until the rinsing tank is empty.
B. Rinsing the pump, operating unit, spray lines, etc. in
case of stop in spraying before main tank is empty (e.g.
beginning rain etc.).
1. Close Self-cleaning filter (yellow valve).
2. Turn black suction valve towards “Rinsing
tank”.
3. Turn green pressure valve towards “No
Agitation”
4. Engage the pump and spray water from rinsing tank in
the field until all nozzle tubes/nozzles are flushed with
GB 08 04
itted) itted)
itted) itted)
T055-0025x