Smartlink; Remote Control Of Other Sony Equipment - Sony KP-41PZ1D Instruction Manual

Wide projection tv
Hide thumbs Also See for KP-41PZ1D:
Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 1
Optional Connections

Smartlink

Smartlink is a direct link between your projection TV set and a VCR.
For Smartlink you need:
• A VCR which supports Smartlink, NextView Link, Easy Link or Megalogic.
Megalogic is a trademark of Grundig Corporation.
EasyLink is a trademark of Philips Corporation.
• A fully-wired 21 pin SCART cable to connect your VCR to the Euro AV connector :3
(SMARTLINK) on the rear of the Projection TV.
The features of Smartlink are:
• Tuning information such as the channel overview are downloaded from the projection
TV set to the VCR.
• Direct projection TV recording: While watching TV you need to press just one button on
the VCR to record this programme.
• Projection TV in standby mode: Press the "Play z" button on your VCR to switch the TV
automatically on.
If you have connected a decoder to a VCR which supports Smartlink feature, select
the menu Further Programme Preset in the
3
AV
to each codified channel. For more details, please refer to the section "Using the
Further Programme Preset function" of this instruction manual.
For more information on Smartlink, please refer to the Instruction Manual of your
VCR.

Remote Control of other Sony Equipment

Using the buttons underneath the cover of the remote control you can
control other Sony equipment.
1
Open the cover of the Remote Control.
2
Set the selector VTR 1234 DVD according to the equipment you want to control:
VTR 1
Beta VCR
VTR 2
8 mm VCR
VTR 3
VHS VCR
VTR 4
Digital Video (DCR-VX 1000/9000 E, VHR-1000)
DVD
Digital Video Disk
3
Use the buttons underneath the cover on the remote control to operate the
equipment.
• If your video equipment has a COMMAND MODE selector, set this
selector to the same position as the VTR 1234 DVD selector on the
TV Remote Control.
• If the equipment does not have a certain function, the corresponding
button on the remote control does not work.
28
Optional Connections
(PRESET) menu and select DECODER
Rear of projection TV
VCR
Decoder
VIDEO
TV
VTR 1 2 3 4 DVD
C H
VTR 1 2 3 4 DVD
C H

Advertisement

Table of Contents
loading

Table of Contents