Automatically Tuning The Tv - Sony FD Trinitron WEGA KV-29FQ76 Kж Operating Instructions Manual

29FQ76 B5 Part 2 GB.fm Page 6 Tuesday, May 7, 2002 11:53 AM
5

Automatically tuning the TV

1. When you switch on the TV for the first time the Sony logo appears on the TV screen,
followed by the Language/Country menu with the word 'English' highlighted. Press the V
or v buttons on the remote control to highlight your required language. Press the OK
button to confirm your choice. From now on all menus appear in your chosen language.
MODE
2. The word 'Country' is now highlighted. Press the V or v buttons on the remote control to
highlight the country in which you are using the TV. It is important to select the correct
country to ensure correct Teletext displays. Press the OK button to confirm your choice.
1 2 3
6
4 5
7 8 9
0
3. The picture rotation prompt appears. Sometimes the Earth's natural magnetism can cause
the screen to look tilted.
a) If no correction is required, press the B button on the remote control.
b) If some correction is required, press the OK button on the remote control. Press the V
4.
The autotune prompt screen appears. Press the OK button to select Yes. The autotune
procedure begins, tuning all the available channels.
A display appears on the TV screen to inform you of the tuning progress.
If no channels are found, a display appears on the TV screen asking you to confirm your
aerial is connected. Check the aerial has been connected correctly then press the OK
button to repeat the tuning process.
5. Once all available channels have been tuned the 'Programme Sorting' menu appears. This
menu allows you to rearrange the order of the channels on the TV.
a) If you do not wish to rearrange the order, press the MENU button to remove the
b) If you wish to rearrange the order, press the V or v buttons to select the channel you
6 Getting Started
or v buttons to rotate the picture over a range of -5 to +5. Press the OK button to store.
'Programme Sorting' menu from the TV screen.
wish to move, then press the b button. Press the V or v buttons to select the new
position for your selected channel. Press the OK button to confirm. The selected
channel moves to its new position. Repeat this procedure if you wish to move other
channels. Press the MENU button to remove the 'Programme Sorting' menu from the
TV screen when you have finished rearranging the channel order.
The TV has now tuned in all the
available channels and is ready for use