Intermatic GRASSLIN thermio eco QE1 Operating Manual page 41

open the keypad cover, you can manually override either program without disrupting the original settings by pressing
the "Select" button.
TMD
When the "RUN PRESET PROGRAM" or "RUN YOUR OWN PROGRAM" mode is active, the arrow points
to TMD (Timed),
BOOST Press the "HEATING" or
"HOT WATER" button until the automatically return to the
To switch ON
BOOST Press the "HEATING" or "HOT
for 1 hour arrow in the display points to
To switch ON WATER" button until the arrow
BOOST
in the display points to BOOST
for 1 hour
ADV Press the "HEATING" or "HOT
ADV Press the "HEATING" or
To switch ON WATER"button until the arrow
"HOT WATER" button until the automatically go back to the
To switch ON
(or OFF) early in the display points to ADV
(or OFF) early arrow in the display points
CONST Press the "HEATING" or
(Advance)
to ADV (Advance)
To switch ON "HOT WATER" button until the permanently - until you move
CONST Press the "HEATING" or "HOT
permanently arrow in the display points to
To switch ON WATER" button until the arrow
CONST (Constant)
permanently in the display points to CONST
32
(Constant)
OFF Press the "HEATING" or
OFF Press the "HEATING" or "HOT
"HOT WATER" button until the permanently - until you move
To switch OFF
To switch OFF WATER"button until the arrow
permanently arrow in the display points
permanently in the display points to OFF
to ADV (Advance)
0662_QE1_QE2.indd 41
The programmer will
The programmer will automatically
timed function after 1 hour.
return to the timed function after
1 hour.
The programmer will automatically
The programmer will
go back to the timed function
according to the next programmed
timed function according to
The programmer stays ON
entry
the next programmed entry.
The timeswitch stays ON perma-
the arrow by using the "HEATING"
nently until you move the arrow
or "HOT WATER" button again.
by using the "HEATING" or "HOT
WATER" button again.
The programmer stays OFF
The timeswitch stays OFF perma-
nently until you move the arrow
the arrow by using the "HEATING"
by using the "HEATING" or "HOT
or "HOT WATER" button again.
WATER" button again.
41
29.03.2017 13:44:18