Outing - Samsung MWR-SH11N User Manual

Outing

Outing function keeps minimum cooling/heating temperature of indoor on your absence .
1 . Press the [ Outing ] button .
- Outing indicator will be displayed .
2 . When an air conditioner is turned off,
- If indoor temperature has 5 °C (9 °F) difference with desired outing temperature, the air conditioner will be turned on
automatically .
- If indoor temperature is same as desired outing temperature, the air conditioner will be turned off automatically .
- it is repeated depending on indoor temperature within 12 hours, and then outing function is canceled .
Auto
will blink .
Cool Outing  Cancel is repeated .
Dry
will blink .
Fan
will blink .
Heat Outing  Cancel is repeated .
• You can use outing function in only cool/heat mode .
NOTE
• The outing function will be active when wired remote controller is turned off .
• The outing function operates with low fan speed .
• If there is any input button on your wired remote controller, outing function will be canceled .
• If your indoor unit's status is changed, outing function will be canceled .
• You can set the desired outing temperature on the user setting mode .
<Temperature setting range>
- Cool mode : 25~30 °C (77~86 °F), default : 27 °C (81 °F)
- Heat mode : 16~22 °C (61~72 °F), default : 16 °C (61 °F)
• You can use the outing function in the master wired remote controller . The slave wired remote controller just
displays it for a outing function status of the master wired remote controller .
- Press the [ Outing ] button on the slave wired remote controller, then the
• The outing function operation will be canceled if you change the master/slave setting on your wired remote
controller .
MWR-SH11N_IB_EN_DB68-08072A-00.indd 17
5 °C difference between indoor temperature
and outing setting temperature
After 12 hr
ENGLISH-17
will blink .
2018/10/16 19:41:58