Naming A Channel (Analogue Channels Only) - Sony FD Trinitron KV-28DX30U Operating Instructions Manual

Additional TV Features

Naming a channel (Analogue channels only)

Names for channels are usually taken automatically from Teletext if available. You can however name a channel or an input video
source using up to five characters (letters or numbers).
MENU
OK
PROGR
RM-888
1. Press the MENU button on the remote control to display
the menu on the TV screen.
V v
2. Press the or buttons to select the
menu screen then press the
'PRESET' menu.
V v
3. Press the or buttons to select 'Manual Programme
b
Preset' then press the
PROGRAMME PRESET' menu.
V v
4. Press the or buttons to select the channel you wish
to name.
b
5. Press the button repeatedly until the first element of
the 'LABEL' column is highlighted.
V v
6. Press the or buttons to select a letter or number
(select '-' for a blank) then press the
confirm. Select the other four characters in the same
way.
7. After selecting all the characters, press the OK button.
8. Repeat steps 4 to 7 if you wish to label other channels.
9. Press the MENU button to remove the menu from the
TV screen.
symbol on the
b
button to enter the
button to enter the 'MANUAL
b
button to
21