Piper Dakota PA-28-236 Pilot Operating Handbook page 286

SECTION 9
SUPPLEMENT 8
When BC is selected, the lateral operating mode
will change from HDG (if selected) to wings
level for 5 seconds. A 45° intercept angle will
then be established based on the position of the
bug.
(7) Missed Approach
a.
b. MISSED APPROACH - EXECUTE.
c.
(8) Before Landing
AP DISC/TRIM INTER - PRESS to disengage AP.
SECTION 5- PERFORMANCE
No change.
SECTION 6- WEIGHT AND BALANCE
Factory installed optional equipment is included in the licensed weight
and balance data in Section 6 of the Basic Pilot's Operating Handbook.
REPORT: VB-910
9-36
3. Heading Selector Knob - ROTATE Bug to the ILS front
course inbound heading.
If the D-Bar is greater than 2 to 3 dots: the autopilot will
annunciate HDG and BC modes with APR flashing;
when the computed capture point is reached the
HDG annunciator will go out, the APR annunciator
will illuminate steady and the selected course will be
automatically captured and tracked.
If the D-Bar is less than 2 to 3 dots: the HDG mode
will disengage upon selecting BC mode; the APR BC
annunciator will illuminate steady and the capture / track
sequence will automatically begin.
AP DISC/TRIM INTER - PRESS to disengage AP.
AP ENG Button - PRESS (if AP operation is desired). Note
AP annunciator ON.
PIPER AIRCRAFT CORPORATION
NOTE
PA-28-236, DAKOTA
ISSUED: JUNE 9, 1982