Advertisement
Quick Links
Table of Contents
Safety & Warnings
Read these instructions, keep them available for reference.
This manual can be downloaded from
Heed all warnings and follow all instructions.
A qualifi ed technician must be present during the installation and use of this product. This product
is capable of producing extremely high sound pressure levels and should be used according to the
specifi ed local sound level regulations and good judgement. Adamson Systems Engineering will
not be liable for damages caused by any possible misuse of this product.
Servicing is required when the loudspeaker has been damaged in any way, such as when the
loudspeaker has been dropped; or when for undetermined reasons the loudspeaker does not
operate normally. Inspect your products regularly for any visual or functionality irregularities.
Protect the cabling from being walked on or pinched.
Read the appropriate IS-Series Rigging Manual before installing the product.
Pay attention to rigging instructions included in both Blueprint AV™ and the IS-Series Rigging
Manual.
Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker
system.
This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around
the enclosure with data storage devices such as hard drives.
In an effort to continuously improve its products, Adamson releases
updated accompanying software, presets and standards for its products.
Adamson reserves the right to change the specifications of its
products and the content of its documents with no prior notice.
Adamson Systems Engineering |
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
IS7px User Manual
3
4
5
6
7
8
9
Page 1
Advertisement
Related Manuals for Adamson IS7px
Summary of Contents for Adamson IS7px
- Page 1 Pay attention to rigging instructions included in both Blueprint AV™ and the IS-Series Rigging Manual. Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker system. This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around the enclosure with data storage devices such as hard drives.
- Page 2 IS7px User Manual Distribution Date: May 1st, 2021 Copyright 2021 by Adamson Systems Engineering Inc.; all rights reserved This manual must be accessible to the person operating this product. As such, the product owner must store it in a safe place and make it available upon request to any operator.
-
Page 3: Table Of Contents
Pay attention to rigging instructions included in both Blueprint AV™ and the IS-Series Rigging Manual. Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker system. This speaker enclosure is capable of creating a strong magnetic fi eld. Please use caution around the enclosure with data storage devices such as hard drives. -
Page 4: Product Introduction
Without sacrificing low resonance to composite material, the IS7px weighs only 15 kg / 33 lbs. • The IS7px is intended to be used as either a standalone system, or a fill enclosure in tandem with other IS-Series products. •... -
Page 5: Wiring
IS7px Wiring • The IS7px (967-0006, 967-0009, 967-5006, 967-5009) comes with 2x Neutrik Speakon™ NL4 connections, wired in parallel. • The IS7pbx (967-0007, 967-0010, 967-5007, 967-5010) comes with an external barrier strip. • Pins 1+/- are connected to the internal passive crossover. -
Page 6: Amplification
IS7px Amplification The IS7px is paired with Lab.gruppen D-Series amplifiers. Maximum quantities of the IS7px per amplifier model are shown below. For a master list, please refer to the Adamson Amplification Chart, found on the Adamson website. https://adamsonsystems.com/support/downloads-directory/design-and-control/e-rack/283-amplification-chart-9/file D40:4L D80:4L 4 IS7px max on a D40 amplifier. -
Page 7: Presets
IS7px applications. Furthermore, there are presets designed to pair with either Adamson subs, or Adamson Line Arrays. For a master list, please refer the Adamson PLM & Lake Handbook, found on our website. https://adamsonsystems.com/support/downloads-directory/design-and-control/e-rack/205-adamson-plm-lake-... -
Page 8: Weatherized
Corrosion resistance extends the lifetime performance of your system in outdoor venues where water, salt and acidity can impact durability and function. All structural steel elements of Adamson weatherized cabinets – including rigging and rigging links – are made of a high yield strength stainless steel alloy that offers 100% corrosion resistance. -
Page 9: Technical Specifications
1.5 kHz 3 kHz 6 kHz 10 kHz 20 kHz IS7px 100x50 Horizontal Pattern IS7px 70x40 Horizontal Pattern Frequency Range (- 6dB) 80 Hz - 18 kHz Nominal Directivity (-6 dB) H x V 70° x 40° or 100° x 50° - Rotatable...