Table of Contents
Advertisement
Wiring
Parameter Programming
Some parameters
are accessible only
when the respective
functionality is installed.
(see 'Specifications').
Important notes:
♦
Power supply must be turned off
during mounting and wiring!
♦
With voltage input, use terminal A10
for range 0...10 V, and A11 – for other.
♦
Connecting a potentiometer requires
excitation voltage of 5 V, 10 mA
(see 'Specifications').
Input signal wiring
Connect the input with regard to its type
(see 'Specifications') through the respective
terminals on the device back.
Voltage transmitters should be powered
ONLY by external source!
Output wiring
Connect the outputs with regard to their types
(see 'Specifications') via the respective
terminals.
Power supply wiring
Connect the right power supply voltage
for your device (see 'Specifications')
through the respective terminals.
Device parameters
BBI250 is a programmable device whose
service behavior is determined by a set
of parameters. All the parameters, along
with their names, symbols, and value ranges,
are given in Table 1.
3
Advertisement
Table of Contents
