Identifying Parts And Controls - Sony SDM-X93 Operating Instructions (primary manual) Operating Instructions Manual

Identifying parts and controls

See the pages in parentheses for further details.
Front of the LCD display
Side view of the LCD display
MENU
OK
INPUT
ECO
MAIN POWER
Rear of the display stand
A 1 (Power) switch and 1 (power) indicator
(pages 9, 18, 23)
This switch turns the monitor on when the 1 (power)
indicator lights up in red. To turn the monitor off, press this
switch again.
If the 1 (power) indicator does not light up, press the MAIN
POWER switch (9).
B MENU button (page 12)
This button turns the menu screen on and off.
C m/M and 2 (volume control) buttons (pages 12, 18)
These buttons are used to select the menu items and make
adjustments, and also display the "Volume" menu to control
the volume.
D OK button (page 12)
This button activates the selected menu item and adjustments
made using the m/M buttons (3).
E INPUT button (page 11)
This button switches the video input signal between INPUT1,
INPUT2 and INPUT3 (SDM-X73/X93) when two computers
are connected to the monitor.
F ECO button (page 19)
This button is used to reduce the power consumption.
G Light sensor (page 19)
This sensor measures the brightness of the surrounding area.
Be sure not to cover the sensor with papers, etc.
H Stereo speakers (page 18)
These speakers output the audio signals as sound.
I MAIN POWER switch (page 9)
This switch turns the monitor's main power on and off.
J Back cover (page 7)
Remove this cover when you connect cables or cords.
K Headphones jack (page 18)
This jack outputs audio signals to the headphones.
GB
(continued)
5