Subscribe to Our Youtube Channel
Related Manuals for Altrex 5000 Series
Summary of Contents for Altrex 5000 Series
- Page 1 Assembly and Use manual Rolling tower 5100 and 5200 Stair tower 5300 Folding tower 5400 and 5500 EN 1004 760251-C-0911 www.altrex.com Relax. Het is een Altrex. Relax. It’s an Altrex. 1 van 32...
- Page 2 Altrex B.V. Zwolle. This publication may only be used for Altrex products. Misprints and printing errors reserved.
-
Page 3: Table Of Contents
VIII Diagram of order of assembly 5200-5500 ..................IX Ballast ..................................... X Parts for the 5000 serie ............................XI Instruction for on the tower ........................... Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex. 3 of 64 3 of 32 3 of 64... -
Page 4: I Introduction
5500 11.8 meter 7.8 meter and specific training for the intended work, in terms * Greater heights may be possible after consulting Altrex and on the of the specific risks involved which, in particular, ad- basis of strength and stability calculations. -
Page 5: Additional Instructions For The Use Of Towers
• Take sufficient measures against weather influ- by, etc., do not lead to dangerous situations; ences that will help to ensure safe working on the 6. that there is sufficient free space to be able to as- tower. Relax. It's an Altrex. Relax. It's an Altrex. 5 of 68 5 of 64... -
Page 6: Inspection, Care And Maintenance
4. Check all parts for damage. Damaged or incor- rect parts may not be used. 5. Damaged parts have to be returned to the manu- facturer for inspection. 6. Towers for professional use must be inspected Relax. It's an Altrex. 6 of 68... -
Page 7: Assembling And/Or Repair Of Replacement Parts
Against b) Should the client ask for an investigation to payment, Altrex can be called in for the repair of your be carried out by an independent institute, product, and/or the assembly of the parts in ques- the costs for this investigation are at the tion. -
Page 8: Rolling Tower 5100
Total weight (kg) including Fiber-Deck® platforms ) I f the tower is used as a freestanding tower in this configuration there have to be 4 stabilizers around it. ) 1 additional platform is needed for the assembly of this configuration. *Only to be used for a platform height up to 4.2 m! Relax. It's an Altrex. 8 of 68... -
Page 9: Method Of Assembly
4 rung frame. Stand on the platform and then position two diagonal braces between the 2nd and 6th rung of the 7 rung assembly frame. Relax. It's an Altrex. 9 of 68... - Page 10 Attach the toe boards. See II.IX 9. The lower platform must be removed before the tower can be used. Then place 2 diagonal braces Relax. It's an Altrex. 10 of 68...
- Page 11 For a 7.2 metre platform height, repeat this step. From the platform, positi- on the 2 guardrail frames on the assembly frame. Secure the guardrail frames with the locking pins. Relax. It's an Altrex. 11 of 68...
-
Page 12: Rolling Tower 5200
Horizontal brace 305-8 Prof 303708 Triangular stabilizer up to 4.2 m platform height* 305612 Triangular stabilizer Easy-Lock® universeel 305613 Toe board set 2 / 1.35 Easy-Fit® 305506 Toe board set 2 / 3.05 Easy-Fit® 305503 12,8 Total weight (kg) including wooden platforms 205/181 215/191 271/271 281/281 327/304 Total weight (kg) including Fiber-Deck® platforms 185/168 195/178 245/245 255/255 294/278 Relax. It's an Altrex. 12 of 68... - Page 13 ) I f the tower is used as a freestanding tower in this configuration there have to be 4 stabilizers around it . number refers to a 2-4 configuration, the 2 number refers to a 1-2 configuration. )Two extra horizontal braces are required to assemble these configurations. * To only be used for a platform height up to 4.2 m! Relax. It's an Altrex. 13 of 68...
-
Page 14: Method Of Assembly
2 and the 6 rung of the base frames. Align the wheels so that they point outwards. Lock the wheels by pushing down the brake pedal. Then set the base frame horizontally in the length and width direction us- ing a spirit level on a rung and a horizontal brace. Relax. It's an Altrex. 14 of 68... - Page 15 Attach 4 stabilizers to the corners of the rolling tower, at an angle of approximately 120° to the longitudinal axis of the rolling tower. Attach the couplers of the stabilizers to the uprights, under the 2nd and the 7th rungs of the base frame. Relax. It's an Altrex. 15 of 68...
- Page 16 For the adjusting of the platforms at different configurations follow the diagrams for the order of assembly under VI. Relax. It's an Altrex. Relax. It's an Altrex. 16 of 68 16 of 68...
-
Page 17: Rolling Tower 5300
) Tower load above 10 meter max. 500 kg . During assembly 1 extra diagonal brace is needed. * To only be used for a platform height up to 4.2 m! Relax. It's an Altrex. Relax. It's an Altrex. 17 of 68... -
Page 18: Method Of Assembly
Place 1 guardrail brace at the stairs side below the top rung onto the uprights of the guardrail frames. Relax. It's an Altrex. 18 of 68... - Page 19 3 and 7 rung of the next frames. 15. Attach a platform next to the stairs on the top Ballast holder art. 415277 rungs of the frames. Ballast 5kg art. 415271 Relax. It's an Altrex. 19 of 68...
- Page 20 The tower is now ready for use. comments: You can use the 5300 stair tower as an access tower, for additional rules and condtitions you should contact Altrex B.V. Relax. It's an Altrex. Relax. It's an Altrex. 20 of 68 20 of 68...
-
Page 21: Folding Tower 5400
Total weight (kg) including wooden platforms Total weight (kg) including Fiber-Deck® platforms ) I f the tower is used as a freestanding tower in this configuration there have to be 4 stabilizers around it. ) 1 additional platform and 2 horizontal braces are needed for the assembly of this configuration. * To only be used for a platform height up to 3.8 m! Relax. It's an Altrex. Relax. It's an Altrex. 21 of 68 21 of 68... -
Page 22: Method Of Assembly
3. Now place a platform with trapdoor on the 3 rung. On the open side of the tower, fit 1 horizon- tal brace between the uprights, under the first The tower is now ready to use with a platform rung. height of 1.8 meter. Relax. It's an Altrex. 22 of 68... - Page 23 This plat- quently assemble the guardrail braces working form will now serve as an auxiliary platform. from the inside to the outside against the up- rights of the guardrail frames. Relax. It's an Altrex. 23 of 68...
- Page 24 17. Repeat steps 15 and 17 twice and then con- tinue with steps 18, 19 and 20. The number of platforms with trapdoor that are required is 3. The rolling tower is now ready. Relax. It's an Altrex. Relax. It's an Altrex. 24 of 68 24 of 68...
-
Page 25: Folding Tower 5500
) 1st number refers to a 2/4 configuration, the 2nd number refers to a 1/2 configuration. ) 2 horizontal braces are needed for the assembly of this configuration * Only to be used with for a platform height up to 3.8 m! Relax. It's an Altrex. Relax. It's an Altrex. 25 of 68... -
Page 26: Method Of Assembly
Se- cure the guardrail frames with the locking pins. Subsequently, attach knee and hip guardrail braces onto the uprights of the guardrail frames, working from the inside to the oustside Relax. It's an Altrex. 26 of 68... - Page 27 2 and the 7 rungs of the base frame. Make sure that the end of each stabilizer is in contact with the solid surface and secure the stabilizer. Position the lowermost arm of the sta- bilizer (approximately) horizontally, assemble the stabilizers securely and check the angle of 120°. Relax. It's an Altrex. 27 of 68...
- Page 28 For the adjusting of the platforms follow the dia- grams for the order of assembly under VIII. The tower is now ready for use. 1/2 configuration 2/4 configuration Relax. It's an Altrex. Relax. It's an Altrex. 28 of 68 28 of 68...
-
Page 29: Diagram Of Order Of Assembly 5200-5500
VIII Diagram for the order of assembly for the rolling tower 5200- 5500 (1 platforms every 2 meters, staggered) (2 platforms every 4 meters) Relax. It's an Altrex. Relax. It's an Altrex. Relax. It's an Altrex. 29 of 68 29 of 68... -
Page 30: Ballast
Number of 5 kg ballast weights per wheel leg INsIDe outsIDe Platform height (meter) wood fiber wood fiber 1.85 2.45 3.05 1.85 2.45 3.05 1.85 2.45 3.05 1.85 2.45 3.05 1/2 configuration 10.2 11.2 12.2 2/4 configuration 10.2 11.2 12.2 Relax. It's an Altrex. 30 of 68... - Page 31 1 platform every 4 meter, 1 platform every 2 meter, staggered 2 platforms every 4 meter, closed Not applicable Number of ballast weights per wheel leg Ballast holder item number: 415277 Ballast 5kg item number: 415271 Relax. It's an Altrex. 31 of 68...
-
Page 32: Parts For The 5000 Serie
301607 Toe board set Easy-Fit® 75 (head) 305505 135 (head) 305506 185 (along side) 305501 245 (along side) 305502 Walkthrough frame 5100-28 307020 305 (along side) 305503 Stabilizer Easylock Universal Base walkthrough frame 307000 305613 Relax. It's an Altrex. 32 of 68... -
Page 33: Instruction For On The Tower
Wheel ø 125 mm 322010 plained in more detail in the manual. Wheel ø 200 mm 511230 Step stirrup 306017 Handrail brace 306018 Vide guardrail 306019 Stairs 306015 Ballast holder 415277 Ballast 5 kg 415271 Relax. It's an Altrex. 33 of 68... - Page 34 Altrex B.V. P.O. Box 30160 8003 CD Zwolle The Netherlands www.altrex.com Relax. It's an Altrex. Relax. Het is een Altrex. Relax. It’s an Altrex. 68 van 32 68 of 68...
Need help?
Do you have a question about the 5000 Series and is the answer not in the manual?
Questions and answers