Cleaning And Maintenance; Cleaning My Watch; Charging The Battery - Withings Pulse HR Installation And Operating Instructions Manual

Cleaning and maintenance

Cleaning my watch

1. Use a lint-free cloth moistened with water to clean the screen and casing of
your Pulse HR.
2. Run the silicone band under water and rub it with hypoallergenic soap to clean
it.
3. Dry the silicone wristband with a soft cloth.

Charging the battery

Pulse HR can operate for up to 20 days on a single charge, depending on your
use of the heart rate mode. Using the continuous heart rate mode all the time
instead of just during activities will deplete the battery much faster.
To charge your Pulse HR, perform the following steps:
1. Connect the USB end of the charging cable to a power source .
2. Position the other end of the charging cable on the back of your Pulse HR in
such a way that the magnets align.
You can check the percentage of the battery on the display of the watch while
it's charging.
Note that charging the Pulse HR using the USB port of a computer can result
in a slower charge compared to a standard 5V 1A mobile device charger.
Pulse HR
v1.0 | November, 2018
EN - 51