Screen Menu (Analog Rgb Signal Only) - Sony SDM-HS75P Operating Instructions Manual

4 Press the m/M buttons to select "ADJUST" and
press the OK button.
The fine tuning menu for color temperature appears on the
screen.
U S E R A D J U S T M E N T
R
G
B
1 2 8 0
5 Press the m/M buttons to select R (Red) or B (Blue)
and press the OK button. Then press the m/M
buttons to adjust the color temperature and press
the OK button.
Since this adjustment changes the color temperature by
increasing or decreasing the R and B components with respect
to G (green), the G component is fixed.
6 Press the m/M buttons to select
OK button.
The new color setting is stored in memory and automatically
recalled whenever "User" is selected.
The COLOR menu appears on the screen.
x Adjusting the SHARPNESS
Adjust to sharpen the edge of images, etc.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select
press the OK button.
The PICTURE menu appears on the screen.
3 Press the m/M buttons to select "
and press the OK button.
The "SHARPNESS" menu appears on the screen.
4 Press the m/M buttons to adjust the sharpness and
press the OK button.
x MODE RESET menu (resetting every
mode to the default) 0
You can reset the adjustments to the default settings.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M button to select
press the OK button.
The PICTURE menu appears on the screen.
3 Press the m/M buttons to select "0 MODE RESET"
and press the OK button.
The "MODE RESET" menu appears on the screen.
4 Press the m/M buttons to select the desired mode
and press the OK button.
• OK: To reset every mode in the PICTURE menu to
the default settings.
12
1 2 8
1 2 8
1 2 8
x 1 0 2 4 / 6 0 H z
E X I T
, then press the
(PICTURE) and
SHARPNESS"
(PICTURE) and
• CANCEL:To cancel resetting and return to the PICTURE
menu.
SCREEN menu (analog RGB
signal only)
You can adjust the following items using the SCREEN menu.
• AUTO
• PHASE
• PITCH
• H CENTER
• V CENTER
Note
When receiving digital RGB signals from the DVI-D input connector
for INPUT1, adjustment is unnecessary.
x Automatic picture quality adjustment
function
When the monitor receives an input signal, it automatically
adjusts the picture's position and sharpness (phase/pitch), and
ensures that a clear picture appears on the screen (
Note
While the automatic picture quality adjustment function is activated, only
the 1 (power) switch will operate.
If the automatic picture quality adjustment function of this
monitor seems to not completely adjust the picture
You can make further automatic adjustment of the picture quality for the
current input signal (See "AUTO" below).
If you still need to make further adjustments to the picture
quality
You can manually adjust the picture's sharpness (phase/pitch) and
position (horizontal/vertical position).
These adjustments are stored in memory and automatically
recalled when the monitor receives a previously input and
registered input signal.
x Make further automatic adjustments to the
picture quality for the current input signal
(AUTO)
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select
press the OK button.
The SCREEN menu appears on the screen.
3 Press the m/M buttons to select "AUTO" and press
the OK button.
Make the appropriate adjustments of the screen's phase, pitch
and horizontal/vertical position for the current input signal
and store them.
S C R E E N
AU TO
P H A S E
P T C H I
H C E N T E R
V C E N T E R
1 2 8 0 x 1 0 2 4 / 6 0 H z
E X I T
page 16
).
(SCREEN) and