Branick 7600 Installation, Operation & Repair Parts Information page 5

D) Align strut assembly by adjusting the lower left and right hooks. When properly aligned, the spring of the
strut assembly will be parallel to the posts of the tool when viewed from both the front and side.
CORRECT
CORRECT
E) Identify the strut assembly type you are servicing.
This type of strut has a bearing plate (which
rotates) and upper spring seat. Place upper
hooks on the upper spring seat. Do not
place hooks on bearing plate.
Front
Side
Type 1
Front
INCORRECT
Side
INCORRECT
Type 2
This type of strut has a bearing plate (which
rotates) and upper spring seat without space
between them. Place upper hooks on the
highest coil of the spring. Do not place hooks
on bearing plate.
4