Kobalt SGY-AIR220 Manual page 11

ASSEMBLY INSTRUCTIONS
3. Place 2 - 3 drops of air tool oil
(not included) into the male plug
(not included) before each use
(See Figure 3).
4. Loosen the collet by depressing the
lock button (F) and placing the wrench (I)
on the flats of the collet and turning it
counterclockwise.
5. Insert a 1/4 in. shank accessory
(not included) into the collet (G).
Tighten the collet by depressing the
lock button (F) and placing the wrench (AA)
on the flats of the collet and turning it
clockwise. Make sure the 1/4 in. shank
accessory is installed securely and tightly
(See Figure 5).
Only use accessories that have an RPM
rating equal to or greater than the tool itself.
Also make sure any accessory is compatible
with the collet opening. Before using tool,
always make sure attachments are properly
mounted/secured. If attachments are not
properly mounted/secured, they can present
a serious hazard and may cause bodily
injury for the operator or anyone in or
around the work area. Always follow the
attachment manufacturer's specifications for
properly attaching accessories to tool.
WARNING
3
4
F
5
B
F
11
B
PUSH
G
PUSH
I
I