Download Print this page

Titan ZG 45PCI-HV Instructions Manual page 7

Table of Contents

Pickup installation

Ground connection of the ignition with rubber spark plug cap

Please make a range test prior the first flight.

Without a good ground connection severe interferings will occur!

Instructions Titan ZG 45PCI-HV

Fit the pickup head with the power coil

screws as shown.

The ignition timing is automatically correct

and cannot (and need not) be adjusted.

The gap between the pickup and magnet is

not critical, it can be anything from 0,2 to 2

mm.

Looked at from the side, the pickup posi-

tion is even less critical, you see here the

middle position. Although 2 mm forwards

or backwards will work perfectly well. The

pickup is a tight fit in the pickup mount and

secured with cyano. If the pickup is sitting

outside the tolerance, washers can be used

for packing between the pickup head and

the crankcase.

Please attach the ground strap on the igni-

tion coil bracket on the crankcase. Because

of the insulator, the carburattor screws are

not suitable.

If a intake bend is used the one of the in-

take bend screws can be used to attach the

ground strap.

Table of Contents