Ametek Reichert 16250 Quick Start Manual page 4

Connecting AL200:
AL200 w/ serial port shown
The Adapter Set configuration can be used for a direct connection to
the AL200, while the Extension Cable configuration can be used to run
the Wireless Dongle to a location hidden from view. Cable Tie Mounts
and Cable Ties are provided to secure any cables or hide them from
view. Fasteners are provided to adhere the Wireless Dongle to the
desired location.
AL200 w/ Adapter Set
2
The AL200 Auto Lensometer
either the Adapter Set or the Extension
Cable configuration to connect to the
A
Wireless Dongle Kit. The serial port
(A) on the rear of the AL200 is where
the Wireless Dongle will connect. In both
configurations the Wireless Dongle will
need to be powered by
the AC-Power Supply.
1
4
AL200 w/ Extension Cable
2
6
can use
®
1