Ametek Reichert 16250 Quick Start Manual page 3

Wireless Dongle Kit configuration options:
Some Wireless Dongle Kits will connect directly to an instrument using
only an Adapter Set configuration, while other Wireless Dongle Kits will
connect to an instrument using only an Extension Cable configuration.
In some instances a Wireless Dongle Kit can connect to an instrument
using either configuration. For those installations it is up to the user to
decide whether you prefer to connect directly using the Adapter Set or if
you prefer to use the Extension Cable to hide the Wireless Dongle from
view behind a counter or under an instrument table.
Follow the instructions for your specific instrument.
NOTE: Your Wireless Dongle Kit may be designed to connect in multiple configurations,
so you may not use all the parts included in this kit for your specific installation.
Connecting ClearChart 3P:
®
The ClearChart 3P Digital Acuity System uses the Adapter Set
configuration to connect to the Wireless Dongle Kit. The serial port (A) on
the rear of the ClearChart 3P is where the Wireless Dongle will connect.
For this configuration, the USB port (B) on the side of ClearChart 3P will
power the Wireless Dongle using the USB Power Cable. Therefore, the
AC-Power Supply is not needed. If desired, Cable Tie Mounts and Cable
Ties are provided to secure the USB power cable or hide it from view.
ClearChart 3P ClearChart 3P connected w/ kit components
7
1
4
A
5
B