Page 2
Welcome to the Reichert Phoroptor VRx & SightChek Wireless Dongle ® ® ™ Kit 13778, allowing Bluetooth wireless connectivity between the Phoroptor ® VRx or the SightChek and a ClearChart 4, ClearChart 4X, ClearChart 4P ® or AcuityChek ™ NOTE: This document will familiarize you with your new accessory. To use this Wireless Dongle you must first configure it to communicate with the Phoroptor VRx or SightChek.
Page 3
Connecting ClearChart 4, 4X, 4P and AcuityChek: The serial port (A) on the rear of the device is where the Wireless Dongle (B) will connect. The Extension Cable is used to run the Wireless Dongle to a location hidden from view, such as the back of the instrument or the wall.
Page 4
Connecting ClearChart 4, 4X, 4P and AcuityChek: (Continued from inside) The Wireless Dongle will need to be powered by the Wireless Dongle USB Power Cable (C) via one of the USB ports (D). Connect the Wireless Dongle USB Power Cable (C) to the Dongle, then connect the other end to the ClearChart 4.