Specifying A Segment Of A File To Play Repeatedly (A-B Repeat) - Sony ICD-TX800 Help Manual

Help Guide
IC Recorder
ICD-TX800

Specifying a segment of a file to play repeatedly (A-B repeat)

You can specify the starting point A and the finishing point B in a file to play the segment between the specified points
repeatedly.
Operate the remote control and follow the steps below:
While playback is on standby or in progress, press
1
point A.
Press / A-B again to specify the finishing point B.
2
The specified segment plays repeatedly.
Note
If you specify the starting point A and then specify the same point as the finishing point B while playback is on standby, the
specified starting point A will be cancelled.
You cannot turn on the button-hold repeat playback function while the A-B repeat playback function is active.
Hint
To turn off the A-B repeat playback function and resume the normal playback, press
To change the segment specified for the A-B repeat playback function, resume the normal playback and then repeat steps 1 and
2 once again.
Related Topic
Selecting the playback mode
Repeatedly playing the current file (Button-hold repeat playback)
/ A-B on the remote control to specify the starting
/
74
A-B again.