Playing A File - Sony ICD-TX800 Help Manual

Help Guide
IC Recorder
ICD-TX800

Playing a file

You can select a file from the HOME menu for playback.
Operate the remote control and follow the steps below:
Note
Your IC recorder is not equipped with built-in speakers. To listen to audio, connect the supplied stereo headphones to your IC
recorder with the dedicated headphone cable that is also supplied with the IC recorder. Then, operate the remote control to play a
file.
Connect the supplied stereo headphones to the USB/Headphone connector on the IC recorder with the
1
dedicated headphone cable that is also supplied with the IC recorder.
Operate the remote control to select "
2
press .
Search and select a file.
3
For instructions on searching a file, see
Press .
4
Playback starts.
Press VOL -/+ to adjust the playback volume.
5
Note
For the customers in Europe only:
When you try to adjust the volume to a level that exceeds the specified level, the "Check The Volume Level" message appears.
Your IC recorder does not support the Bluetooth profiles (A2DP and AVRCP). Therefore, the external device that is connected to
the IC recorder via a Bluetooth connection, such as a Bluetooth audio device or a smartphone, cannot play the audio files that are
stored on the IC recorder. Only the IC recorder can play such files.
Hint
To stop playback, press
Music" or "
Selecting a
STOP.
Recorded Files" on the HOME menu, and then
file.
64