Table of Contents
Advertisement
Quick Links
EN 1496:2006 / B
DESIGNATED USE
The rescue lifting device RUP 502-[...] series is a component of rescue system. Using this device the rescuer can lift the other
person from a lower to higher place or lower him from a higher to lower place. Lowering distance is limited to 2 meters. The RUP
502-[...] series device complies with EN 1496:2006 / B.
Description of RUP 502-[...] series rescue lifting devices:
•
RUP 502 - lifting device with grip for mounting on the tripods: TM 9 / TM 9-L / TM 9-W /
•
RUP 502-A - lifting device with grip for mounting on the tripods: TM 6 / TM 12 / TM 12-2 / TM 13
•
RUP 502-B - lifting device with grip for mounting on the tripods: TM 7
sign "xx" - standard working rope length in meters (20, 25m)
TECHNICAL DATA
Working load limit:
hand force required:
Gear ratio:
Crank length:
Rope diameter:
Weight:
* The grip shape may be different in particular RUP 502-[...] model variants.
edition: 1/03.04.2014 en
RESCUE LIFTING DEVICE RUP 502-[...]
AT 050-[...] xx
Reference
number:
140 kg
22 kg
5:1
300 mm
6,3 mm
rope 20 m - 13 kg
rope 25 m - 14 kg
automatic brake inside the cover
crank
reel
absorber's
connector
energy
absorber
rope
connector
rope
INSTRUCTION MANUAL
READ CAREFULLY BEFORE
USE THE EQUIPMENT
tripod's leg
grip*
locking lever
Identity label
1/8
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Protekt AT 050 Series
Summary of Contents for Protekt AT 050 Series
- Page 1 INSTRUCTION MANUAL RESCUE LIFTING DEVICE RUP 502-[...] AT 050-[...] xx Reference READ CAREFULLY BEFORE EN 1496:2006 / B number: USE THE EQUIPMENT DESIGNATED USE The rescue lifting device RUP 502-[...] series is a component of rescue system. Using this device the rescuer can lift the other person from a lower to higher place or lower him from a higher to lower place.
- Page 2 INSTALLING ON THE TRIPOD 2. Put the device on the tripod's leg. 1. Open the grip. Grip locking pin must be fastened on the locking hole situated on the lockin pin outside part of the tripod's leg. grip locking hole tripod's leg 3.
- Page 3 INSTALLING DEVICE ON A STRUCTURAL ANCHOR ELEMENT It is possible to install device directly on the structural anchor element like flat surface (e.g. wall) or steel profile. The structural anchor element to which the device is fastened must have stable construction and have minimal static strength of 14 kN. Construction and fastening of the structural anchor element must prevent of accidental disconnection of the device.
- Page 4 INSTALLING ON THE STEEL PROFILE To the narrow structural elements the winch should be installed using two holes ( 10 mm and oblong 10x45) situated on the back wall of the winch. Device should be installed using two M10 steel bolts. Put the bolts through the back wall of the winch and through the structural anchor profile.
- Page 5 CAUTION! • It is forbidden to use the rescue lifting device as the protection against falls from height. When there is a danger of falling from a height additional secondary fall arrest system conforming EN 363 must be used. • The lifting / lowering function is for rescue purposes only and not for lifting / lowering loads.
- Page 6 INSPECTION Before each use of Personal Protective Equipment (PPE) it is obligatory to carry out a pre-use check of the equipment, to ensure that it is in a serviceable condition and operates correctly before it is used. During pre-use check it is necessary to inspect all elements of the equipment in respect of any damages, excessive wear, corrosion, abrasion, cutting or incorrect acting, especially in rescue lifting devices - cable (wires, clips, ferrules, loops, thimbles, connectors, adjusting elements) and automatic brake proper acting, casing, energy absorber (attaching loops, connectors), connectors (main body, rivets, gate, locking gear acting).
- Page 7 CONTENT OF THE IDENTITY LABEL a) Device type. b) Model symbol. c) Reference number. d) Number/year/class of the European standard. e) Rescue equipment - information. f) Month and year of manufacture. g) Serial number of the tripod. h) Caution: read the manual. i) Marking of the manufacturer or distributor of the tripod.
- Page 8 NAME AND DATE OF REASON FOR SERVICING / DATE REPAIRS CARRIED OUT SIGNATURE OF NEXT REPAIR COMPETENT PERSON EXAMINATION PRODUCER: PROTEKT, 93-403 LODZ, ul. Starorudzka 9, POLAND, tel: +48 (42) 680 20 83, fax: +48 (42) 680 20 93, www.protekt.com.pl...
Need help?
Do you have a question about the AT 050 Series and is the answer not in the manual?
Questions and answers