Protekt RUP503-U Use And Installation Manual

Rescue lifting device

Advertisement

Quick Links

RUP503-U
RESCUE LIFTING DEVICE
EN 1496:2017/B
Figure 1 - Overview

TABLE OF CONTENTS:

1.
GENERAL DESCRIPTION ............................................... 1
2.
LOAD LIMIT AND STRENGTH ........................................ 1
3.
TRANSPORT AND WEIGHT ........................................... 2
4.
MAINTENANCE AND STORAGE.................................... 2
5.
TIME OF USAGE ............................................................... 2
6.
PERIODIC INSPECTIONS ............................................... 2
7.
TABLE NO. 1 - POSSIBLE INSTALLATION OF
DEVICE RUP503-U ..................................................................... 3
8.
OVERALL DIMENSIONS .................................................. 3
9.
MARKING ............................................................................ 4
10.
INSTALLATION OF RUP503-U ....................................... 5
11.
GENERAL SAFETY RULES ............................................ 6
12.
FALL PROTECTION EQUIPMENT ........................................... 6
13.
WARRANTY ....................................................................... 7
14.
IDENTITY CARD ................................................................ 8
Machine Directive
2006/42/EC
USE AND INSTALLATION MANUAL
0001268 edition: 1/22.03.2021
1.

GENERAL DESCRIPTION

Rescue lifting device RUP503-U can be used as a
component of rescue equipment. With use of the device a
victim can be ascended from a lower onto a higher level or
descended from a higher to a lower level. The descending
distance cannot exceed 2 m.
BASIC TECHNICAL DATA
Working Load Limit
Required hand force
Gear ratio
Lever length
Rope diameter
Weight
The device RUP503-U is formed by:
a)
general winch with reel on which work rope of 6.3mm
in diameter is wound. The device is fitted with holder
UTB (AT017-330),
b)
for spring-type energy absorber SDW with
connectors AZ011,
c)
detachable part of crank (for transportation of the
device). The device RUP503-U can be mounted on
various devices using universal holders. Please
refer to Table 1.
2.

LOAD LIMIT AND STRENGTH

a)
GENERAL INFORMATION
Minimum Breaking Strength (MBS): 21kN.
The device can be loaded with work force along the profile
to which it is fixed as shown in Figure 2.
The maximum load that could be transmitted in service
from the device to the static construction - 10kN.
If the device is used as a part of a fall arrest system,
the user must be equipped with an element limiting
maximum dynamic forces applied on user while arresting
a fall to max. 6kN.
The device can be used
to descend personnel
above the 2-meter limit
by means of an
additional WR / CR /
CRW retractable type
fall arrester to arrest a
fall.
200kg
10kg
7.2:1
300mm
6.3mm
25m rope - 22.5kg
35m rope - 24.0kg
45m rope - 25.5kg
50m rope - 26.2kg
Page 1 of 8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RUP503-U and is the answer not in the manual?

Questions and answers

Summary of Contents for Protekt RUP503-U

  • Page 1 0001268 edition: 1/22.03.2021 GENERAL DESCRIPTION RUP503-U Rescue lifting device RUP503-U can be used as a component of rescue equipment. With use of the device a RESCUE LIFTING DEVICE victim can be ascended from a lower onto a higher level or descended from a higher to a lower level.
  • Page 2 USE AND INSTALLATION MANUAL 0001268 edition: 1/22.03.2021 LIFTING MATERIALS - If the equipment becomes wet, either when cleaning or in Working Load Limit (WLL): 1000kg use, allow it to dry naturally, and keep it away from any Safety Factor (SF): 2.1:1. sources of heat.
  • Page 3 USE AND INSTALLATION MANUAL 0001268 edition: 1/22.03.2021 TABLE NO. 1 - POSSIBLE INSTALLATION OF DEVICE RUP503-U DEVICE UNIVERSAL HOLDER TRIPOD TM6 / TM6-T / TM12 / TM12-2 / TM13 / TM13-T / UTB (AT017-300) TM14 / TM15 GENERAL DIMENSIONS Figure 3 – Overall dimensions of device...
  • Page 4 USE AND INSTALLATION MANUAL 0001268 edition: 1/22.03.2021 MARKING Marking: a) Name/ type of device. b) Device model designation. c) Reference number. d) Number/year/class of European standard. e) CE mark and number of notified body controlling manufacturing of the equipment. f) Month and year of manufacture. g) Serial number of device.
  • Page 5 USE AND INSTALLATION MANUAL 0001268 edition: 1/22.03.2021 10. INSTALLING RUP503-U Install the device in socket of the universal holder and secure with automatic pin. When using the device for evacuation of personnel (in accordance with EN 1496:2017/B) additionally use energy absorber SDW mounted using AZ011 at the end of work rope.
  • Page 6 USE AND INSTALLATION MANUAL 0001268 edition: 1/22.03.2021 11. GENERAL SAFETY RULES Periodically examine connections fitting components of the equipment to prevent any accidental loosening or disconnection. • it is forbidden to use a combination of the equipment where function of any one component is affected by, or interferes with the function of any other.
  • Page 7 12 months. Periodic inspection shall be carried out by the manufacturer’s authorized service point located at the following address: PROTEKT Grzegorz Łaszkiewicz ul. Starorudzka 9 93-403 Łódź or person trained in inspections of such equipment.
  • Page 8 USE AND INSTALLATION MANUAL 0001268 edition: 1/22.03.2021 14. IDENTITY CARD IDENTITY CARD (compliant with EN365) Reference number RUP503-U Serial number: ………………………. of device Date of first use (installation) Date of manufacture: …………………. ……………………….. ……………………………………………………………………………………………… Place of installation ……………………………………………………………………………………………… ……………………………………………………………………………………………… User name: ………………………………………………………………………………………………...

Table of Contents