Basic Control; Charging Functions; Standard Charge Time And Usage Time - Canon Rayo S1 User Manual

Basic control
Charging functions
1.
Connect the micro USB charging jack to the power terminal of the projector.
• You must only use an authentic charger (DC 5V/2A). Use of a non-certified
• If you charge the product using a publically available portable battery, make sure
2.
When the charging lamp turns green, disconnect the charger from the
projector.
• A red charging lamp means it is charging, a green charging lamp means charging
Standard charge time and usage time
If you are using the projector for the first time, or have not used it for a long time,
charge the battery before use.
12
Rayo S1
User Manual
Caution
charger can cause a malfunction.
to check whether the rated output fits the projector specification before use.
(Projector spec: 5V/2A)
If you use a charger with a rated output lower than the required specification, it
can cause the main unit to malfunction.
Note
is complete.