Specifications - Spectros SF-ExplorIR Operation & Maintenance Manual

Specifications

Product Type........................ Portable sulfuryl fluoride (SO
Measuring Range ................ 0 to 100ppm sulfuryl fluoride
Warm-Up Time.................... 15 minutes (900 second clock countdown)
Operating Time ................... 30 plus minutes before the purge-air bag needs refilling
Detector Type ...................... Infrared, Non-Dispersive (NDIR)
Sensitivity............................ 1 ppm with ReZero
Response Time..................... 90% of response within 5 seconds; 100% in 7 seconds
Temperature Drift............... 1.5 ppm per °C between purge cycles
System Noise ....................... Less than 40dB(A) at 10 ft (3 m)
Operating Temp .................. 32 to 122°F (0 to 50°C)
Ambient Humidity .............. 5 to 90% RH (non-condensing)
Altitude Limit...................... 6,562 ft (2,000 m)
Power ................................... DC battery, provides at least 6 hours of operation
Power Consumption ............ 15 Watts
Front Panel.......................... 3 Indicator lights:
Audible Alarm ..................... Internal audible alarm activated when a gas-alarm (5 ppm) occurs
Dimensions .......................... 8D x 19L x 5W inches (203 x 483 x 127 mm)
Weight.................................. Less than 9 lbs (4 kg) including battery
Valid Calibration Period......12 months
Warranty.............................. 1 Year from date of shipment SF ExplorIR, Battery 6 months
(Masterfume ) gas monitor
TM
ON – Green light flashes during warm-up, and then glows steady
during normal operation
FAULT – Yellow light flashes when there is a system fault
ALARM – Red light flashes when the detected gas level reaches the
alarm level (alarm level factory set at 5 ppm)
F ) (Vikane™) (Profume™) (Zythor
2 2
4
)
TM