Sony SDZ-S100 Operating Instructions Manual page 21

Block Size
Default is 512 byte block size fix mode.
OFF
Default is variable mode.
ON
Immediate
WFM
Enable Immed bit field in WRITE FILEMARKS command.
OFF
Ignore Immed bit field, and always return good status
ON
immediately.
UA Control
Enable to report UnitAttention (UA) sense.
OFF
Disable to report UnitAttention (UA) sense under AIX/IRIX
ON
environment.
4
After changing the DIP switch settings, replace the access cover.
If you are using a SDZ-S100 (SCSI model), proceed to "Setting the SCSI ID
(SDZ-S100 only)" on page 22.
If you are using a SDZ-S130 (Fibre Channel interface model), proceed to
"Setting the Loop ID (SDZ-S130 only)" on page 23.
Definition
Definition
Definition
Chapter 2 Installation
21