Blind Spot Information System - Acura RDX 2020 Owner's Manual For Quick Reference

DRIVING
3. Select Forward Collision Warning Distance.
4. Select Long, Normal, or Short.
5. Press BACK to exit the menu.
Turning the System On or Off
n
™
Press and hold the CMBS OFF button.
A beep sounds and a message appears
in the Multi-Information Display. The
™
CMBS indicator appears when the
system is off.
n Important Safety Reminder
CMBS is designed to reduce the severity of an unavoidable collision. It does
not prevent collisions nor stop the vehicle automatically. It is still your
responsibility to operate the brake pedal and steering wheel appropriately
according to the driving conditions.
108 |

Blind Spot Information System

Alerts you to a detected vehicle in your left or right blind spot while driving
between 20 mph (32 km/h) and 100 mph (160 km/h). When the system
detects vehicles approaching from behind in adjacent lanes, the appropriate
indicator comes on for a few seconds, providing assistance when you change
lanes.
Blind Spot Information System Alert Indicator comes on when:
• A vehicle enters the alert zone from behind to overtake you with a speed
difference of no more than 31 mph (50 km/h) from your vehicle.
• You pass a vehicle with a speed difference of no more than 12 mph (20
km/h).
When your turn signal is on and a vehicle is
detected, the blind spot indicator blinks
and a beep sounds until the area is clear or
the turn signal is off.
Changing Settings
n
Change the alert type or turn the system on or off. Use the True Touchpad
to make selections.
1. From the Home screen, select the Settings App.
2. Select Vehicle.
3. Select Driver Assist System Setup.
4. Select Blind Spot Information.
DRIVING
*1
*1 - If equipped
| 109