Table of Contents
Advertisement
VEHICLE CONTROLS
• Your vehicle speed is 25 mph (40 km/h) or more.
• There are no preceding or oncoming vehicle with headlights or taillights
turned on.
• There are few street lights on the road ahead.
Switching to low beam
One of the following conditions must be met before the low beams turn
on.
• Your vehicle speed is 15 mph (24 km/h) or less.
• There is a preceding or oncoming vehicle with headlights or taillights
turned on.
• There are many street lights on the road ahead.
Manually switching between high beam and low beam
n
Using the
Pull the lever toward you for flashing the high beams then
lever:
release it within about one second while driving.
To reactivate, pull the lever toward you for flashing the high
beams then release it while driving. The auto high beam
indicator will come on.
Using the
Turn the light switch to
light
To reactivate, turn the light switch to AUTO when the lever
switch:
is in the low beam position, the auto high beam indicator will
come on.
Turning the System On or Off
n
Make sure the headlight lever is in the
low beam position with the switch
rotated to the AUTO position. The
auto high beam system indicator
comes on.
To turn the system
Pull and hold the headlight lever toward you for
on:
about 30 seconds, until the indicator flashes once.
To turn the system
Pull and hold the headlight lever toward you for
off:
about 40 seconds, until the indicator flashes twice.
42 |
.
Wiper Operation
The windshield wipers and washers can be used when the vehicle is on.
Front Wipers
n
Move the wiper lever up or down to the desired position.
1. MIST
2. OFF
*1
*1
3. INT
/AUTO
Headlight Integration with Wipers
n
When the headlights are in the AUTO position, they automatically turn on
when the front wipers operate several times within a certain interval. The
headlights turn off shortly after the wipers are turned off or if there is
enough ambient light.
n
Intermittent (INT) Wipers
When you move the lever to the INT
position, the wipers operate based on
the delay adjustment.
Rotate the adjustment ring to adjust
the wiper delay.
VEHICLE CONTROLS
4. LO: Low speed wipe
5. HI: High speed wipe
*1 - If equipped
| 43
Hide quick links:
Advertisement
Table of Contents
