Table of Contents
Advertisement
*
Function control is available on the unit and the remote control.
**
The TV Option will only be displayed and the TV control functions are only available if the optional TV Tuner (P/N PODTVT2) is installed.
***
The monitor select is available on the units which have two system mode control.
1.
POWER Button*
Press this button to turn the unit ON and OFF.
2.
MONITOR SELECT***
M1 Button –
Change the remote control code to enable to control of the unit when set to the M1 mode.
M2 Button –
Change the remote control code to enable to control of the unit when set to the M2 mode.
Note: Please select the remove control code to M1 mode due to the existing unit only can be activate by using M1 mode control code only.
3.
SYSTEM MENU Button
Allow the user to access the system menu. Press cursor (
4.
TV Mode Select Button**
Switches certain function keys on the remote control for TV functions.
5.
SOURCE Button*
Each time the button is pressed, the audio / video source will change in the following sequence: DVD > VIDEO 1, VIDEO 2, VIDEO 3.
6.
AUTO MEMORY Button (AUTO PROGRAM Button)**
When the AUTO MEMORY button is pressed, all channels are searched and channels that are detected with signals of sufficient levels are
automatically stored in memory.
7.
SKIP / SEARCH Button**
This button selects between SKIP and SEARCH mode. In "SKIP mode" the TV tuner will tune and stop on channels that are programmed
into memory when the CHANNEL UP / DOWN buttons are used. When the SKIP mode is disable, the TV will stop on all active channels.
8.
ERASE / WRITE Button**
While tuned to a channel, pressing this button will alternately store or erase the channel from memory.
) buttons to desired the screen mode, OSD language and source default DVD.
8
Advertisement
Table of Contents
