Philips Pronto TSU9200 Starter Manual page 12

My A/V equipment does not respond to commands from the Remote Control
• Check the status of the battery on the screen. If the Battery level icon is red, recharge the
Remote Control as described in Charging the Remote Control on page 5.
• Contact your installer. He might suggest to check whether your equipment is in range.
You can check this in the Service Menu.
B Warning
Only enter the Service Menu if your installer instructs you to do so! Do not enter the
Service Menu to solve problems yourself!
To enter the Service Menu: press
All buttons are now disabled except for the rotary wheel and
to scroll and
12
TSU9200_END_EN-ES-FR.indb 12
and
to make a selection.
for 3 seconds.
. Use the rotary wheel
Support
14-09-2007 12:05:01