miniland warmy advanced Manual page 18

ENGLISH
13. Please note – preheating is not necessary or
recommended.
14. Pour desired quantity of tap water into the unit just
before switching the unit on.
If it contains any water from a previous use, pour out
the excess water before switching on the appliance.
15. Do no place the appliance near a hot gas source or
a n e l e c t r i c b u r n e r o r i n a h e a t e d o v e n .
16. A fire may occur if the Warmer is covered or comes
into contact with inflammable materials, including
curtains, draperies, walls, etc, when in operation.
Do not place any items on the top of the appliance
when in operation.
17. Do not cover the Warmer with metal foil. This will
cause overheating of the appliance. Do not place any
inflammable materials on or close to the warmer, such
as paper, cardboard or plastic film or any material that
can be set afire or melted.
18. During the warming or sterilization process, the
warming chamber becomes hot.
Open by using the handle (which is on the lid). NOT
OPEN LID WHEN IT IS INUSE.
19. When the warming process has finished, remove
the bottle or food jar immediately. If left in the warmer,
the temperature of the feed will continue to increase.
20. Make sure that the heating guidelines are always
being followed to ensure that food is not over- heated.