Sound Settings - JVC KD-X560BT Instruction Manual

Setup
Bluetooth Settings
Sync ON/OFF: Activates or deactivates the
Phonebook
synchronization of the phonebook
in the connected mobile phone with
the unit.
BT
Displays the information about the
Information
connected Bluetooth device (device
name, phone name, Bluetooth version,
and mac address).

Sound settings

1
Press < > to display the sound setting.
2
Turn the volume knob to select an item (see the
following table), then press the knob.
3
Repeat step 2 until the desired item is selected/
activated or follow the instructions stated on
the selected item.
4
Press < >.
Graphic
Selects a preset equalizer suitable to the
Equalizer
music genre.
CLASSIC / Flat / DRVN2 / HARD / hiphop
/ Jazz / pop/ R&B / User
Select [User] to use the settings made
1) Press the volume knob to select the
frequency.
2) Turn the volume knob to adjust the
level.
3) Press <
Loudness
Sets the amounts of boost of low and
high tones.
"ON", "OFF" (Default)
X'over
1) Press <E>/<F> to select the
speaker.
2) Press the volume knob to select the
item.
3) Turn the volume knob to adjust the
value.
4) Press <
Delay
1) Press <E>/<F> to select the
speaker.
2) Turn the volume knob to adjust the
value.
3) Press <
>.
>.
>.
English |
13