Function Settings; Setup; Settings - JVC KD-X560BT Instruction Manual

Setup

Function settings

1
Press < > to display the function menu.
2
Turn the volume knob to select the item to set
(see the table below), then press the knob to
make a selection.
3
Press < > to exit.
✎
NOTE
• If no operation is done for about 10 seconds, the
operation will be canceled.
Repeat All: Repeats all files.
( indicator lights up.)
One: Repeats current file.
( indicator lights up.)
Random
OFF: Normal playback.
ON: Randomly plays all files.
(
12
indicator lights up.)
Setup

Settings

1
Press an hold < > to display the general
setting.
2
Press <E>/<F> to select the category.
3
Turn the volume knob to select an item (see the
following table), then press the knob.
4
Repeat step 3 until the desired item is selected/
activated or follow the instructions stated on
the selected item.
5
Press < >.
Audio Settings
Fader
R12 — F12 (00): Adjusts the front and
rear speaker output balance.
Balance
L12 — R12 (00): Adjusts the left and
right speaker output balance.
General Settings
Beep ON/OFF: Activates or deactivates the
keypress tone.
Date/Clock Adjusts the date and clock. (P.3)
Language Selects the text language used for on-
screen information.
Time
12h/24h: Selects time format.
Format
Wallpaper BLACK/BLUE: Selects the wallpaper
image.
Demo
Set the demonstration mode. Default
is "ON".
Initialize
Select [Initialize] and then select [Yes] to
set all the settings to the initial default
settings.