Sonic Alert HomeAware HA360MK Quick Reference And Installation Manual

Complete Home Alerting Solution
1

Setting Up Your HomeAware™

1. Remove all contents of the box.
– HomeAware™ - Main Unit
– Doorbell Transmitter
– Doorbell Chime Box Connector Cord
– Vibrator / Bed Shaker
– Telephone Line Cord
2. Plug the power supply into back of
the Main unit, 7.5V 2A DC IN.
3. Plug Main unit power supply into a
120V outlet.
4. Plug Vibrator/Bed Shaker into the
vibrator outlet on the back of the
Main unit. (Optional)
2

Setting Time of Day

1. Press the Time Set button. Blinking red
dots will show on the display.
2. Press the Hour and Minutes buttons up
or down to set desired time. When
setting the time make sure the PM
indicator light reflects the correct time.
3. Press the Enter button to complete.
3

Setting Alarm 1

1. Press and hold AL.1 Set button. Blinking
red dots will show on the display.
2. Press the Hour and Minute buttons up
or down to set desired alarm time.
3. Press the Enter button when done to
complete. A red LED Alarm indicator
light will appear on the display's left side
indicating alarm 1 is now set.
4. Repeat for AL.2.
HA360MK
Quick Reference and Installation Guide
7.5V 2A
DC IN
120V Outlet
EXT.
7.5V 2A
BATT.
DC IN
LAMP
USB CHARGE 5V
SW.
PM Indicator
Main
PM
A1
A2
Alarm Indicator
Main
PM
A1
A2
VIBRATOR
TEL.
CELL PHONE
TEL.
LINE DETECTOR
Time Set Alarm Off Set Up
AL.1 Set Volume Tone Enter
AL.2 Set Hour Minute Back
SNOOZE
Time Set Alarm Off Set Up
AL.1 Set Volume Tone Enter
AL.2 Set Hour Minute Back
SNOOZE
VIBRATOR/
BED SHAKER