Select Music Drive; Settings To Use Jvc Remote Application; Select Control Mode - JVC KD-X462BT Instruction Manual

USB/iPod/ANDROID
For key layout on the faceplate, see page 3 or page 4.
To On the faceplate
Reverse/ Press and hold S / T.
Fast-forward*3
Select a file Press S / T.
Press 2 J / 1 K.
Select a folder*4
Press 4 B repeatedly.
Repeat play*3*5
[TRACK REPEAT]/[FOLDER REPEAT]/[ALL REPEAT] : MP3/WMA/AAC/
[ONE REPEAT]/[ALL REPEAT]/[REPEAT OFF]
Random play*3*5 Press 3 A repeatedly.
[FOLDER RANDOM]/[ALL RANDOM]/[RANDOM OFF] : MP3/WMA/AAC/
[SONG RANDOM]/[ALL RANDOM]/[RANDOM OFF] : iPod
*3 Not applicable for ANDROID.
*4 This does not work for iPod/ANDROID.
*5 For iPod: Applicable only when [HEAD MODE] is selected.
10
ENGLISH

Select music drive

On the remote control While in USB source, press 5 MODE repeatedly.
Press and hold H / I.
Stored songs in the following drive will be played back.
• Selected internal or external memory of a smartphone (Mass
Storage Class).
Press H / I.
• Selected drive of a multiple drive device.
Press J / K.

Settings to use JVC Remote application

JVC Remote application is designed to control the JVC car receiver's
WAV/FLAC file
operations from the iPhone/iPod (via USB input terminal).
: iPod
Preparation:
• Install the latest version of JVC Remote application on your
device before connecting.
• For more information, visit <http://www.jvc.net/cs/car/>.
WAV/FLAC file
You can make the settings in the same way as connection via
Bluetooth. (Page 19)

Select control mode

While in iPod USB source (or iPod BT source), press 5 MODE
repeatedly.
[HEAD MODE]:
[IPHONE MODE]: Control iPod using the iPod itself. However, you can
Control iPod from this unit.
still perform play/pause, file skip, fast-forward or fast-
reverse from this unit.