Table of Contents
Advertisement
training cue, depending on your
training program.
Vibration:
Applies vibration instead of
stimulation to the dog the entire time
you press the training key, for a
maximum of 8 seconds. The
effectiveness of vibration may vary
based on the dog's
temperament
and
experience.
Selecting
a
Training Mode
You can select a different training mode
for each dog collar device.
1
Select a dog collar device (page 6).
2
Select
MODE
to toggle through the
available training modes.
Enabling Barklimiter Mode
When Barklimiter mode is enabled, the
device corrects the dog's barks
automatically.
Select
.E.
•E
appears on the LCD display and the
status LED on the dog collar device
flashes three
times
when the device enters
Barklimiter mode.
TIP:
Occasionally, the dog collar device
may not enter Barklimiter mode if there is
signal interference or if it is outside the
range of the handheld device. With
•E
selected on the LCD display, you can
select any training key to force the device
to enter Barklimiter mode.
Changing the Intensity Level
You can select a different intensity
level
for each dog collar device.
1
Select a dog collar device (page 6).
2
Select
.A.
or
T
to increase or
decrease the intensity level.
The numerical intensity level appears
on the LCD display.
Device Information
Delta XC Handheld Device
Specifications
Operating
From -20° to 60°C (from
temperature range
-4
o
to 140°F)
Charging
From
oo
to 40°C
(from
temperature range 32° to 104
°F)
- - - - - - - - - -
-- - - - - - - - - - - - -
8
Quick Start Manual
Hide quick links:
Advertisement
Table of Contents
