Ericsson T39 User Manual page 66

66 Setting up WAP and E-mail
4. Scroll to Rename,
5. Scroll to Chg homepage,
you want to have as homepage.
6. Scroll to Save to,
during browsing should be available for all your WAP profiles or
only for the WAP profile you are currently using.
7. Scroll to Gateway,
8. For GPRS and GSM data, select IP settings,
described in "To enter IP settings" below.
For SMS, scroll to Change type,
SMS settings,
settings" below.
To enter IP settings
1. Select Connect using,
to use when browsing.
2. Scroll to IP address,
gateway.
3. Scroll to User id,
4. Scroll to Password,
gateway.
5. Scroll to Data mode,
6. Scroll to Security,
connection, or Off if you do not want a secure connection.
7. Scroll to Show images,
images while browsing, or Off if you do not want to view images
while browsing.
8. Scroll to Response timer,
which a download attempt will stop.
Note:
An IP address consists of four groups of digits, with a maximum
of three in each group, for example 136.225.37.163. If any of the digit
groups consists of only one or two digits, enter a leading zero (0) for
each digit that is missing, 136.225.037.163.
To enter SMS settings
1. Select Service centre,
network operator's service centre.
2. Scroll to SMS gateway,
network operator's SMS gateway.
3. Scroll to User id,
Y E S
. Enter a name for the profile.
Y E S
. Enter the address of the WAP page
Y E S
. Select if the bookmarks that you add
Y E S
.
Y E S
. Continue as described in "To enter SMS
Y E S
. Select the data account you want
Y E S
. Enter the IP address of the WAP
Y E S
. Enter your user id for the WAP gateway.
Y E S
. Enter your password for the WAP
Y E S
. Select a data connection mode,
Y E S
. Select On if you want a secure
Y E S
. Select On if you want to view
Y E S
. Enter a time limit in seconds after
Y E S
. Enter the phone number of your
Y E S
. Enter the phone number of your
Y E S
. Enter your user id for the WAP gateway.
Y E S
Y E S Y E S
, SMS,
. Continue as
. Then select
Y E S
.