Ericsson T39 User Manual page 64

64 Setting up WAP and E-mail
4. Enter the settings that you have received from your operator.
For GPRS: access point name, user id and password.
For GSM data: phone number, user id and password.
Confirm each setting by pressing
5. Scroll to Save?, press
To enter additional settings for a data account
1. Scroll to Settings,
2. Select a data account and press
3. Select Edit.
4. Select the setting you want to edit and press
Y E S
press .
5. Repeat step 4 for all the settings you want to edit.
Settings for GPRS:
APN (Access point name address) – the address of the external data
network you want to connect to, either an IP address or a text string.
User id – your user id to log on to the external data network.
Password – your password to log on to the external data network.
Passwd. request (Password request) – if this setting is on, you are asked
for a password each time you log on to the external data network.
Allow calls – if you want to allow incoming calls during a GPRS
session, select On. If not, select Off,
IP address – the IP address that the phone uses when communicating
with the network. If you do not enter a value, the network provides
you with a temporary IP address.
Advan. settings (Advanced settings) – these are optional. Consult
your network operator.
Settings for GSM data:
Phone number – the phone number of your Internet service provider.
User id, Password, Passwd. request. Same as for GPRS above.
Data rate – select the speed you want for the connection.
Dial type – select analogue or ISDN connection.
If you want to change access type, you have to create a new data
account and select the access type you want to use.
Y E S
Y E S
.
Y E S
, Data comm.,
Y E S
.
Y E S
, Data accounts,
.
Y E S
. Edit the setting,
.
Y E S
.